欢迎来到北京多多宾城建筑机械有限公司
010-61441596
永光机械
永光机械
  Product

产品展示

产品展示PRODUCT

GW20型钢筋弯箍机

 GW20型全自动钢筋弯箍机主要技术参数

GW20 Full-automatic Steel Hoop Bending Machine Technical Parameter


 

 

目型

GW20

GW20B

GW30A

GW30B

额定电压

380V

额定频率

50Hz

电机功率 

1.5 Kw

2.2Kw

工作周期  

20-25r/min

26r/min

弯曲钢筋直径

φ4-φ20mm

σb450Mpa

Ⅱ级螺纹钢φ6-14

 

可弯曲钢筋范围φ6~φ28(Ⅱ级螺纹钢)圆钢φ6~φ30 

(σb450Mpa

工作角度

90° 135° 180°

整机重量

110±10Kg

210±10Kg

 

 

 

 

 

 

 

 





 

 


GW20型全自动钢筋弯箍机是一种工程用小型钢筋弯曲设备,本机具有弯曲工序简化,工作效率高,角度控制采用控制模块,弯曲准确,可将σb450Mpa的钢筋加工成所需的各种几何形状。

本机轻巧灵活,使用简便,性能稳定、双脚踏开关,自动弯曲安全性高。控制角度的传感器采用非接触式,无撞击、无磨损。使用寿命长,弯曲效率是弯曲机的4-5倍。它是小直径钢筋弯曲的理想设备,更是大型弯曲机的重要补充设备。

 GW20 Full-automatic Steel Hoop Bending Machine is a small bar bending device for a project. This machine bending process is simple and working efficiency is high. The angle controlled by control module, bending accurately. It can bend the σb≤450Mpa reinforced bar into various shapes required.

This machine is flexble, easy to use, and has stable performance, double foot pedal switch, bending automatically in safety. The sensor of the control angle is non-contact, no impact, no wear. L ONG USING LIFE. The bending efficiency is 4-5 times as other bending machines. It is not only the ideal equipment for small diameter steel bar bending, but also important supplementary for large bending machine.


Copyright 2017 北京多宾城建筑机械有限公司 All Rights Reserved
技术支持:企迪网络